Comparison of real and fake details (the first one is real)

Natural Light Comparison

Detail Comparison

Case left and right sides of the curvature as well as the shape is basically 100% similarity, the same also uses 904L steel quality. Bottom cover part, bottom cover and case fit, the bottom of the case slightly bulging, which is also one of the characteristics of the yacht case put the head of the crown part of the stereoscopic, as well as the arc of the three three-point arrangement. Size, shape are done consistently. Special note, the yacht’s outer ring rotation feel, this time also and the real thing to do almost the same, bi-directional rotating bezel on top of the base, a circle of 120 small cells, every time you turn a little bit, you can feel a hint of frustration, not as hard as the water ghost, not qmt frustration so strong. This can only be realized. However, when you use it, you also need to pay attention to the rim because it is a frosted backing, so there may be scratches, this is unavoidable. The rims will also get dirty easily, just use hand sanitizer + soft bristle toothbrush to clean them.

The strap and the case with the upper and lower fit, the distance of the gap, in each style, are not the same, so they are buying the original disassembly copy, to match, you can see the case front and the strap articulation, the upper and lower two bends, the middle of the bulge, the details of the place, can be seen in the details of the control. Strive for perfection. The case and the bottom of the strap with, can also be seen through the picture, even the rounded ends of the strap and the curvature of the inner groove of the case to achieve a tight fit.
Both sides of the case engraving, note note note, important thing to say three times, is engraved, engraved character is characterized by a stronger sense of three-dimensionality, and in the middle of the word groove, accompanied by stars and dots of flash. This is in the need to remove the strap to see the place, but also spared no effort to make it out. It’s not perfect, but it’s the best it can do. The same is true for human beings.

As you can see in the picture above, the shades of the entire character are, basically, close. It doesn’t want to be as obvious a color difference as the just larger image, including the real thing, and the colors are infinitely close.
Six o’clock position, blue font printing / also known as Tiffany blue, three-dimensionality, color tone are done quite perfectly. Six o’clock position, red font printing, although the picture is one less, but can be very responsible to say, and blue is the same level.

The six o’clock position that was just lost The blue disk red font comparison can be found back in this kind of chart. You see, I really did not blow water it, red font color / three-dimensional sense is very close to it. You can see the overall appearance of the pointer is close to the real thing. But through the picture above also found two problems. First, the two gray/blue yacht, hour hand of Mercedes l0g0, thickness is not the same. Second, the genuine second hand of the printing oil, as far as possible and inkjet traces. And it’s a problem with both genuine seconds hands. After all, this is a comparison of the real thing, not a critique of the real thing. Perhaps, the second hand without inkjet is not a genuine second hand!
As you can see in the picture above, the shape and color of the hands are relatively close to each other. The standard of craftsmanship is also noteworthy.

The word nail chamfer polishing, can not be said to be the same, right. I can only say that it is basically the same. The reason why the studs are a bit brighter than the other competitors is that after the nickel plating, there is an additional layer of platinum plating. The advantage is that the word nail more full, and more bright from some. Everywhere you look, there is a dedication to craftsmanship and costless investment. When it comes to nail polishing, I can’t say it’s pioneering, but it’s just in the interest of the customer to do the best job possible. Eliminate bad modification, or rather, you would rather believe that the craftsmanship of small workshops, at the same time for the big factory quality craftsmanship to cast a disdainful eye, and even feel that the capital are all evil. Who blinded your eyes. You watch friends to experience for themselves. Dare to buy, disassemble, production, finished product, compared with the real thing, if some people have the same confidence, then, in accordance with the above steps, do the same, for the existence of problems, such as color difference. Will also be informed in the form of graphics for customers, will not deliberately conceal any details of the differences, this is the attitude of doing things, the same is also the attitude of people. No port hi who will, real work is the hard way.

The strap part, will not repeat here
I can only say that it maintains the usual standard of 904L steel.
Various details of the chamfer grinding
The strength of opening and closing, as well as the feel of pressing.
Compared with other products, it is whiter and brighter as well as more delicate.